Posted: September 10th, 2021

ICT703Assessment Task 2Page2Background:You have obtained a contract position at a small marketing and advertising firm called the Colour Ability Corporation

ICT703Assessment Task 2Page2Background:You have obtained a contract position at a small marketing and advertising firm called the Colour Ability Corporation (CAC). Your contract responsibilities are to help them plan their emerging networking and communications requirements and update their IT resources. CAC currently hires 80 employees and operates from Level 10 and 11 on the X Tower in Brisbane CBD. CAC has recently purchased a four-story building in a Brisbane suburb where they can allocate a separate floor to each of their four departments, i.e., (1) marketing, (2) advertising, (3) design and photography, and (4) HR and accounting. They plan to move to their new office in three months. Also, CAC’s list of customers has greatly expanded to other cities, mainly Sydney where their customers in Sydney are demanding more interactive advertising media, including video presentations. The management recognizes the business potential in this new market in Sydney and have leased a small office in Sydney (aka CAC’s fifth department) to host 8 local employees.They have hired you to review their existing IT resources and produce a proposal that allows the company to take advantage of their firm’s expansion. The management has stated that if the proposal meets their requirements, they may hire you full-time to implement and manage these new resources.You now have an idea of the scope of the project that you have undertaken, but do not have all of the information required to proceed. Using the details provided in the following sections you are required to prepare a professional business report of 2500 words addressing the eight activities identified below.Part 1: Gather System Requirements.CAC has provided a written summary containing floor plans for their Brisbane and Sydney offices, and notes from a verbal interview with the management team. Gather as much information as possible from these two sources to help you plan a technical solution for CAC’s networking and communications requirements.Step 1: Review available information.CAC Information: Because CAC is a small size business, it has no IT department. Everyone has taken care of their own resources in the Brisbane office. If they could not fix the problem, they would call in an outside service technician. Currently, the machines are connected together through fourteen (14) 10/100Mb switches (with 10 ports each). Employees work with older PC tower computers with 2 Gb of memory, a 250 Gb hard drive, and 7 USB ports. The processors are AMD Athlon 64 x2 dual core processor and a CD/DVD read/write drives. Additionally, graphics production editors (team of 10 employees in Brisbane) utilize PCs with 8 GB of memory and 500 Gb hard drive to run special editing software that uses very high-resolution graphics.The systems are all still running the Windows 7 operating system, and there is a low-capacity, monochrome laser printer attached to each machine. These machines are not capable of running the software required for video development.

ICT703
Assessment Task 2 Page1
ICT703
Network Technology and Get research paper samples and course-specific study resources under   homework for you course hero writing service – Manage ment

Assessment Task 2
Assessment and Submission Details

Marks 35% of the total assessment for the course
Due Date – Friday 5 October at 5PM
Submission details
Please submit this assignment as a single MS Word document (.docx) via the assessment module of
the course web site on Blackboard. All assignments will be checked for plagiarism and/or collusion
between individuals.
Please note that each student needs to make a second copy of the assignment and this copy must
be produced within 24 hours of it being requested by the Course Coordinator.
Assignment submission extensions will only be made using the official Faculty of Arts, Business and
Law Guidelines. Requests for an extension to an assignment extension must be made prior to the
date of submission.
Notice: Parts of this assignment brief are adopted from the Cisco Networking Essentials course that
is copyright material. © 2017 Cisco and/or its affiliates. All rights reserved.
The University of the Sunshine Coast (USC) is a Cisco Networking Academy.
ICT703
Assessment Task 2 Page
2
Background:
You have obtained a contract position at a small marketing and advertising firm called the Colour
Ability Corporation (CAC). Your contract responsibilities are to help them plan their emerging
networking and communications requirements and update their IT resources. CAC currently hires
80 employees and operates from Level 10 and 11 on the X Tower in Brisbane CBD. CAC has
recently purchased a four-story building in a Brisbane suburb where they can allocate a separate
floor to each of their four departments, i.e., (1) marketing, (2) advertising, (3) design and
photography, and (4) HR and accounting. They plan to move to their new office in three months.
Also, CAC’s list of customers has greatly expanded to other cities, mainly Sydney where their
customers in Sydney are demanding more interactive advertising media, including video
presentations. The management recognizes the business potential in this new market in Sydney
and have leased a small office in Sydney (aka CAC’s fifth department) to host 8 local employees.
They have hired you to review their existing IT resources and produce a proposal that allows the
company to take advantage of their firm’s expansion. The management has stated that if the
proposal meets their requirements, they may hire you full-time to implement and manage these
new resources.
You now have an idea of the scope of the project that you have undertaken, but do not have all of
the information required to proceed. Using the details provided in the following sections you are
required to prepare a professional business report of 2500 words addressing the eight activities
identified below.
Part 1: Gather System Requirements.
CAC has provided a written summary containing floor plans for their Brisbane and Sydney offices,
and notes from a verbal interview with the management team. Gather as much information as
possible from these two sources to help you plan a technical solution for CAC’s networking and
communications requirements.
Step 1: Review available information.
CAC Information: Because CAC is a small size business, it has no IT department. Everyone has taken
care of their own resources in the Brisbane office. If they could not fix the problem, they would call
in an outside service technician. Currently, the machines are connected together through fourteen
(14) 10/100Mb switches (with 10 ports each). Employees work with older PC tower computers
with 2 Gb of memory, a 250 Gb hard drive, and 7 USB ports. The processors are AMD Athlon 64
x2 dual core processor and a CD/DVD read/write drives. Additionally, graphics production editors
(team of 10 employees in Brisbane) utilize PCs with 8 GB of memory and 500 Gb hard drive to run
special editing software that uses very high-resolution graphics.
The systems are all still running the Windows 7 operating system, and there is a low-capacity,
monochrome laser printer attached to each machine. These machines are not capable of running
the software required for video development.
The Sydney office will be operational soon, and additional employees will be hired to handle the
new video production work. The company will have the following employees at the Sydney office:
ICT703
Assessment Task 2 Page
3
Sydney Department Get research paper samples and course-specific study resources under   homework for you course hero writing service – Manage r – Duties include scheduling work, hiring and managing
part-time workers, weekly payroll, and project tracking. The administrative manager uses
spreadsheet and database software and must be able to use email.
Film Production Editor – Requires special editing software that uses very high-resolution
graphics and requires at least 16 GB of memory to run effectively. The software also
interfaces with a video capture interface board that uses PCIex16 slot in the computer. This
specialized software only works in a Windows 10 environment. It is important that the
computer purchased for this position supports high-resolution video and has enough
memory to enable the editor to work quickly. The production editor produces the final
copies of the films and works within very tight deadlines. The editor must also be able to
use email.
Film Crew – The other six employees are mobile workers, consisting of two production
assistants, two camera people, a production manager, and a film director. They are in the
Sydney office an average of two days per week. The rest of the time is spent either at
customer sites or on film locations.
Because all of the mobile workers are required to have access to email and production
schedules, both at the office and while on location, it is important for them to be able to
connect to the main office from anywhere. They have no special software requirements,
but they do need a large hard drive to store the film files while they are working on them.
The mobile workers must work at various locations and may not always be able to plug
into a data port. It is important that they are able to connect to the internal network
wirelessly.
Because of the sensitive nature of some of the documents and records required by the managers
of all five departments, private color laser printers must be installed in the managers’ offices in both
Brisbane and Sydney. Combination copiers/printers and high-resolution scanners must also be
purchased and shared among all employees.
For the purposes of training and compatibility, all of the computers should use the same operating
system and applications, if possible.
ICT703
Assessment Task 2 Page
4
Brisbane Office Floor Plan (four identical floors)

Figure 1: Brisbane Office Floor Plan
Sydney Office Floor Plan
Figure 2: Sydney Office Floor Plan
Step 2: Interview with the Get research paper samples and course-specific study resources under   homework for you course hero writing service – Manage ment.
Below are the notes collected during an interview session with the management team.
• CAC employees need access to email, which they currently get from their ISP. The email
system that the ISP provide uses a web client that CAC employees can access over the
Internet. CAC employees are also able to access this email from their home computers.
• CAC want to be able to set up email accounts for employees to use while they are working
with them.
ICT703
Assessment Task 2 Page
5
• It is necessary for managers and employees to share files between themselves. These files
are usually spreadsheets and documents, but sometimes, they must send large film files
back and forth between the mobile workers and the office. Files must be available for
download during the day, and also at night, when employees are away from the office.
These film files are usually between 5 GB and 20 GB in size.
• The management wants some project files to be kept securely in a central location and can
be accessed and shared only by the department managers.
• Color printers that are also capable of making copies are required for each workspace –
one on each floor of the new Brisbane office and one in the Sydney office. Because the
printers are expensive, it is necessary for everyone to be able to print to it when they are in
the office. Some of the storyboard documents are over 100 pages, with lots of graphics.
• Wireless internet access should be made available in all five departments.
• In response to the CAC’s enquiries regarding their IPv4 needs, their ISP has provided them
with the following diagram (Figure 3) and has advised that CAC can continue using their
current block of public IPv4 addresses, that is 194.32.9.0/28, as well as blocks of private IPv4
addresses, i.e., 192.168.0.0/24, for their private networks. Each department is assigned to
an individual subnet, where all the departments and the Sydney office should be able to
communicate with each other, and any necessary internal server(s), and access the
Internet.
Figure 3: Proposed Topology
Step 3: Select the appropriate services and equipment.
After you have gathered all the appropriate information, it is time to do some research. You must
now use your knowledge and research skills to propose an appropriate technical solution for their
limited budget and time requirements. Proposing a solution that is beyond the financial capabilities
of the company is of no benefit. However, it can be helpful to propose a solution within the
current budget, and offer suggestions that would improve network performance or productivity if
ICT703
Assessment Task 2 Page
6
additional funding becomes available. If you can justify these extra expenditures, the company may
consider them for later implementation or may even find the extra funding needed.
When developing a plan, it is often easier to start at the end user and then work back toward the
network and any shared resources, and then finally, any external connections to the Internet or
other networks. Many different forms have been developed to help with planning and equipment
selection. It is a good idea to use one of these forms or to design your own to keep everything
organized.
Activity 1
Use the following form to develop a proposed computer system for each of the specific uses, i.e.,
general use, graphics production and film production. Search the Internet or local sources for
availability and pricing information. Use the same form to propose a server that can support their
email and FTP requirements.
Computer System Planning Form
Department/Team:
Location:
Component Recommendation
Processor: (Manufacturer, Model, Speed)
Memory: (Type, Amount)
Hard Drive: (Type, Capacity)
CD-ROM/DVD: (Read, Read/Write, Speed)
USB Ports: (Number, Location)
Video Card: (Manufacturer, Model, Video
RAM)
Sound Card: (Manufacturer, Model)
Modem: (Internal/External, Speed, Standard)
Network Card(s): (Ethernet: speed, Wireless,
Standard)
Operating System: (Manufacturer, Version,
Compatibility)
Monitor: (Size, Resolution, Refresh Rate)
Printer: (Manufacturer, Model, Type, Speed)
Speakers: (Manufacturer, Model, Type)
Internet Connection: (USB, Ethernet, Wireless)
After the end-user systems have been selected, it is time to look at the workflow and decide on any
shared components and network technology to support this workflow. This can include such
things as shared printers, scanners, and storage as well as any routers, switches, access points and
integrated service routers. When planning a network infrastructure, always plan into the future. For
larger companies, because it is usually a substantial investment, the infrastructure should have a
lifetime of about 10 years. For smaller companies and home users, the investment is significantly
less and change occurs more frequently.
ICT703
Assessment Task 2 Page
7
Activity 2
Using the Internet and locally available resources, select a high-speed, color copier/printer for the
CAC offices. Provide supporting details to justify your selection.
Activity 3
Demonstrate a network layout for CAC requirements – you can use Figure 3 as the starting point.
Because the company has limited funds available for this project, it is important that where possible
only equipment designed for the small business and home markets be used. Provide supporting
details to justify your selection of each equipment type, e.g., access points, switches and routers.
Activity 4
It is necessary to plan the Internet connectivity, and which services are provided by the ISP and
which services must be provided in-house. Larger companies usually provide services in-house,
while small businesses and individuals normally rely on an ISP to provide these services. Most ISPs
offer a variety of services and service levels. Selecting an ISP is complicated, and not all technologies
and services are available in all regions of the world.
Using the Internet, research alternative local ISPs to provide connectivity for CAC. If selected, CAC
will rely upon this ISP for DNS and web mail. The ISP must also provide 99.999% uptime for access
to the internal FTP/email server. Because you are the only IT person at CAC, it is also important that
the ISP provides a high-level of technical support. Create a comparison worksheet for at least two
local ISPs, including costing.
Activity 5
Which internal services must be offered by CAC, and which devices provide these services? Provide
supporting details to justify your answer.
Activity 6
Complete the following network planning form and justify your answers as it relates to the
proposed CAC network.
Are wired connections required? Number:
Are wireless connections required? Number:
Wireless standard Choice of a/b/g/n/ac
Firewall required? Yes/No
ISP connectivity required? Yes/No
Type of ISP connectivity Choice of DSL, cable, serial, dialup
Internal or external modem required? Yes/No (if Yes, then type of modem)
Cables required? Yes/No (if Yes, then type of cable)
Battery backup required? Yes/No
ICT703
Assessment Task 2 Page
8
Part 2: Plan the installation.
After the equipment has been selected and the required services planned, the physical and logical
installation is planned out. Physical installation includes the location of equipment and devices,
along with how and when these devices are to be installed. In the business environment, it is
important to minimize disruption of the normal work processes. Therefore, most installations,
changes, and upgrades are done during hours when there is minimal business activity. Physical
installation should also consider such things as adequate power outlets and ventilation, as well as
the location of any necessary data drops.
Activity 7
Equally as important as planning the physical layout of the network and equipment is planning the
logical layout. This includes such things as subnetting, addressing, naming, data flow, and security
measures. Servers and network devices are assigned static IP addresses to allow them to be easily
identified on the network and to also provide a mechanism for controlling access to these devices.
Most other devices can be assigned addresses using DHCP. Note that both a server and its backup
server must be accessed via the same public IP address.
Devise subnetting and addressing schemes for CAC. The schemes must provide all network devices
and servers with a static address and allow all other hosts to be configured via DHCP. Identify the
ranges of useable IP addresses (and default gateways) for DHCP, and assign all network devices an
appropriate IP address (and default gateways). Use the following tables to report all the required
setups, and then reflect this information on the network layout developed in Activity 3.
Table 1: Subnetting Template (to be used for all CAC internal and external subnets)
Subnet Network
Address
Slash
Notation
First Usable
IP Address
Last Usable
IP Address
Broadcast Address
Table 2: Addressing Template (to be used for all devices/interfaces with static IP addresses)
Device Interface* IP Address Subnet Mask Default Gateway^

*Can be NIC, Serial, FastEthernet, etc.
^ Use N/A for routers.
Note: Show all your workings for subnetting in an appendix.
Activity 8
CAC is concerned that their files and resources may be vulnerable through the wired or wireless
networks. Explain how the use of public and private IP addresses together may address this
concern, and provide a security plan that allows only CAC employees to connect to the network
and gain access to company information and resources.
ICT703
Assessment Task 2 Page
9
Part 3: Prepare and present the proposal.
All of the gathered information and the proposed technical solution must be assembled into a
format that makes sense to the company who has asked you to provide a solution. The formal
report usually contains many different sections, including:
• Title page
• Executive Summary
• Tables of Contents, Figures and Tables
• Introduction
• Project proposal, comprising needs statement; goals and objectives; methodology and
timetable; technical solutions and evaluation; budget summary; future plans
• Recommendations and Conclusions
• Bibliography and List of Refences
• Appended information
The report is often presented to various groups for approval. When presenting the report, present
it in a confident, professional, and enthusiastic manner. The report must be technically accurate
and free from spelling and grammatical errors.
Assignment Requirements and deliverables
You are to prepare a formal proposal report for CAC that includes all the components listed above
by detailing the equipment, management and security requirements for the above case study and
justifying suitable technologies to enhance the business’s communications and networking within
and outside the organisation. Be sure to include all cost information and network diagrams.
The report must be written in Microsoft Word. Multiple files will not be accepted.
Report Structure: The report must be formatted using the following guidelines:
• Paragraph text: Use 11-point Calibri single line spacing
• Headings: Use Arial in an appropriate type size
• Margins: 2.0cm on all margins
• Header: Report title
• Footer: Page numbering – up to and including the Table of Contents use roman numerals
(i, ii, iii, iv), restart numbering using conventional numerals (1, 2, 3, 4) from the first page
after the Table of Contents.
• Title Page must not contain headers or footers
• The report is to be structured as a formal business report.
• Refer to the following references for details on report structures: Summers, J., Smith, B.
(2014: 2024 – Essay Writing Service | Write My Essay For Me Without Delay), Communications Skills Handbook, 4th Ed., Wiley, Australia
ICT703
Assessment Task 2 Page10
Referencing: The report is to include appropriate references and these references should follow the
Harvard method of referencing. Note that ALL references should be from journal articles,
conference papers, technical papers, recognized experts in the field or vendors’ and service
providers’ websites.
Marking: The assignment will be marked according to the marking guideline at Appendix A.
ICT703
Assessment Task 2 Page11
Appendix A – Marking Guideline
Marking Criteria Maximum
Marks
Marks
Obtained
Title Page and Tables of Contents / Figures / Tables 0.5
Headers and Footers and Page Numbering 0.5
Executive Summary 1
Content
Introduction 1
Activity 1 4
Activity 2 1
Activity 3 4
Activity 4 2
Activity 5 2
Activity 6 2
Activity 7 10
Activity 8 5
Recommendations & Conclusions 2
Citations, Bibliography & In-text Referencing –
Total Marks 35 /35
Comments:

Order | Check Discount