Posted: March 5th, 2022

1. What limits upgrade potential for the system processor?

1. What limits upgrade potential for the system processor?

The type of CPU socket and chipset provided on the motherboard.

2. How can CPU performance be improved?

Overclocking—setting the processor to run at a higher clock speed than it was

designed for.

3. Why can cache improve performance?

A CPU tends to repeat the same routines and access the same data over-andover

again. If these routines are stored in fast cache RAM, they can be accessed

more quickly than instructions and data stored in system memory.

4. What does SMP mean?

Symmetric Multiprocessing—installing more than one CPU. This requires a

motherboard with multiple CPU sockets.

5. How is the heat sink and fan assembly attached, and what problems can

occur releasing it?

The heat sink is attached to the motherboard via a clip or push pins. There will

also be a power connector for the fan. Clip mechanisms can be difficult to

release; push pins are now more common and just require a half turn on each

pin with a screwdriver to release. Another issue can arise where too much

thermal paste has been applied, causing the heat sink to stick to the processor.

6. What must you check when inserting a PGA CPU chip?

That pin 1 is aligned properly and that the pins on the package are aligned with

the holes in the socket. Otherwise, you risk damaging the pins when the ZIF

lever is lowered.

7. What is the difference between a heat sink and a heat pipe?

A heat sink uses solid metal fins to dissipate heat through convection (often

assisted by using fans to move air across the fins). A heat pipe contains fluid

that evaporates in the area over the CPU, cools and condenses in a another part

of the pipe, and then flows back to the area over the CPU to continue the cycle.

5-3

1. What advantages does UEFI have over BIOS?

UEFI supports 64-bit CPU operation and better hardware support at boot. UEFI

also allows for full GUI system utilities and mouse support plus better system

startup security options (such as pre-OS boot authentication).

2. Name three keys commonly used to run a PC’s BIOS/UEFI system setup

program.

Esc, Del, F1, F2, F10.

3. What widely supported boot method is missing from the following list? HDD,

FDD, Optical, USB.

Network/PXE (Pre-eXecution Environment)—obtaining boot information from a

specially configured server over the network.

4. Where should you launch a typical firmware upgrade utility—from system

setup or from Windows?

If the option is available, it is safer to run a firmware upgrade from the system

setup program as it reduces the risk of some other process interfering with the

update.

5. If you want to enforce TPM system security, what other BIOS feature should

you enable?

A supervisor password to prevent the TPM keys from being accessed or cleared.

6. True or false? Processor extensions such as VT are set by the vendor

depending on the CPU model and cannot be enabled or disabled by the user.

Mostly false. A feature such as VT is sometimes disabled on some low-end

models, but if it is available as a feature of that model, the user can choose

whether it is enabled or disabled.

7. A user’s computer was recently installed with a new optical drive. The user

now reports a “chassis” error message after the POST sequence. What might

be the cause?

Intrusion detection is enabled in the BIOS.

8. When you are configuring BIOS security, what is the difference between a

supervisor password and a user password?

The user password allows the boot sequence to continue, while a supervisor

password controls access to the firmware setup program.

9. What security system allows system boot to be disabled if the computer is

reported stolen?

LoJack for Laptops (other tracking software suites are available).

5-4

1. How would you calculate the power used by a component?

Multiply its voltage by the current it draws (W=V*I).

2. What causes a fuse to blow—excessive voltage or excessive current?

Excess current.

3. What is the significance of a PSU’s power output when you are designing a

custom build PC?

It determines the number of drives, expansion cards, and peripherals that the

PC can support (assuming the peripherals do not have their own power

supplies).

4. Are you able to use a standard ATX12V PSU with a Mini-ITX motherboard?

Yes (assuming it fits in the case you have chosen).

5. You have a power supply with an 8-pin connector on it. What is this for?

It supplies power to a PCI Express graphics card.

6. You are connecting a new PSU. The PSU has a square 4-pin P4 cable but there

is no square 4-pin receptacle on the motherboard. Should you leave the

cable disconnected?

No; it will plug into an 8-pin EPS12V receptacle near the CPU. You should check

the motherboard documentation for advice about which pins to plug the cable

into.

7. What setting should you check before installing a PSU?

That the voltage selector is set to the correct voltage (or if there is no selector,

that the PSU is suitable for the voltage used by the building power).

8. Another technician replaced the PSU on a PC. Later the same day the PC’s owner

contacts you to say that the system has been displaying numerous alerts about

high temperature.

What do you think might be the cause?

You would need to open the case to investigate the problem. Perhaps when the

upgrade was performed, one of the fan power connectors was not attached

properly. If the PSU cabling was not secured with cable ties, it could disrupt air

flow within the case, reducing the effectiveness of fans. There could be a fault

with the fan on the new PSU.

5-6

1. What cause might you suspect if a PC experiences intermittent lockups?

Assuming the cause is not recent installation of faulty software or hardware,

then thermal or power problems are most likely. Loose connections or faulty

memory or CPU are also possibilities.

2. How might you diagnose a thermal problem?

Feel if the system is hot to touch, check temperature gauges, watch for cyclic

lockup/reboot problems.

3. What measurement would you expect from a multimeter if a fuse is good?

Zero ohms.

4. What might stop a POST from executing?

Faulty cabling and connections, poorly-seated chips, faulty interfaces and

devices, logic errors, faulty CPU, motherboard, or PSU.

5-9

1. Which component is likely to be a performance bottleneck on a workstation

used to edit digital movies?

The disk subsystem is most likely to cause the performance bottleneck. The files

will be too large to be stored completely in system memory and so must be

streamed from the disk, which will need to be both large and fast.

2. For what type of workstation is a CPU with 4 or more cores particularly well

suited?

Multiple cores benefit software that can take advantage of multi-threading.

Examples include virtualization software and Rapid Application Development

(RAD) tools.

3. You are specifying a PC to act as a home theater. What multimedia outputs

should it support?

Surround sound audio outputs to the speaker system and HDMI to the TV

screen.

4. Which factors are most likely to make a PC used for gaming require high-end

cooling?

These PCs use at least two heavyweight processors: the CPU and GPU. Also,

gamers are more likely than most other users to overclock components to

improve performance. Overclocking requires very effective thermal

management solutions.

5. On a thin client, which component is more important: NIC or HDD?

Thin clients do not need much permanent storage at all—some can make do

without any mass storage. They do not generate that much network traffic

either but that said, the NIC is the more important component here.

6. Why might high-spec components (CPU, memory, RAID) not be a good idea in

a home theater PC?

These devices need to operate as quietly as possible and using high-spec

components means heat, heat requires cooling, cooling usually means fans, and

fans mean noise.

5-10

1. A user needs to be able to access the central employee data repository to

run reports, but does not need access to any local applications used to

create, edit, and manage the employee data. The employee data is managed

on a server that can be accessed with a log in. What type of client is best in

this case?

Thin client

Virtualization workstation

Thick client

2. June has recently been put in charge of making updates to the Human

Resource employee benefits website. She will be publishing a monthly

newsletter and posting company-wide announcements, among other small

updates and changes, on a regular basis. All changes to the website must be

tested on a number of platforms and web browsers to verify that the

changes are correct regardless of the operating system and browser. What

type of client setup would you suggest for her?

Answers will vary, but will most likely include a virtualization workstation so that

she can switch from different operating systems and test any website changes

quickly.

3. In order to properly support the HR employee benefits website, a new server

running client VMs has been installed so that the environment that the

application requires can be strictly administered by IT staff. Current PCs will

be used to access the Client VM environment that is configured on the VM

Server. What needs to be present at all PCs that will be accessing this new

server and application?

☐ Appropriately configured VM Client.

☐ Fast network connection to server hosting the VM environment.

☐ Upgrade to video cards.

4. True or False? The HR manager’s client computer must meet the

recommended requirements to run Windows 10 so that she can access and

use all of the HR-related applications used by the organization. In this case,

the best client option is a thick client.

True

5-11

1. Customer 1 is using a desktop PC to play home movies and to set up slide shows

to show his family their vacation photos and is having difficulty with the computer

freezing during the movies. He is looking for a solution that will allow him to store

and play his movies seamlessly through a computer. He also wants his wife to be

able to access the pictures and movies from her laptop within the house.

What type of computer setup would you suggest for this customer? What

specific questions might you ask this customer about additional component

needs?

Answers may vary, but will most likely include setting up a home server PC for

easy file sharing among the household computing devices and to provide more

speed to play movies from the PC. You may ask if they are in need of additional

storage space and if they are looking for redundancy through a RAID array in

the PC.

2. Customer 2 is from a small real estate office who has recently hired a graphic

designer to produce informational pamphlets and other marketing materials for

the agency, such as property drop sheets and circular layout designs. The office

manager has asked your company to determine the hardware and software

needs for the designer’s workstation so that it can be ordered and set up before

their scheduled start date in two weeks.

What hardware and software requirements would you suggest for the

graphic designer’s workstation?

Answers may vary, but will most likely include a PC with a high-end, multicore

processor, a high end video card, and the maximum RAM that the motherboard

can handle. In addition, the motherboard should contain multiple high-speed

ports for peripherals such as external hard drives or additional video cards. The

applications will most likely include Adobe’s Creative Cloud or similar graphicdesign

software.

324 | The Official CompTIA® A+® Core 1 and Core 2 Student Guide (Exams 220-1001 and 220-1002)

Lesson 5: Installing, Configuring, and Troubleshooting Internal System Components | Topic E

LICENSED FOR USE ONLY BY: MICHAEL NGUYEN-IBANEZ ・ 23370021 ・ JAN 27 2022

3. Customer 3 is looking to make the switch from a traditional TV cable box and DVD

player to a home theater PC, so that she can stream Netflix and record shows and

movies from her TV. She already purchased a computer from a local home

entertainment store but cannot figure out why she cannot connect the cable TV

wire into the computer.

What would you check for first?

She needs to have a TV tuner card installed in the computer. The tuner card

provides the port to connect the cable from the provider to the computer. You

would also want to verify that the tuner card is correctly configured, and that all

device drivers are installed and up-to-date.

Order | Check Discount